Terofox 소개
우리에 대해
산량 및 품질 관리
공장
비전, 가치, 전망-비전
Terofox인터내셔널
제품
1/4 회전 볼 밸브
이중 플레이트 체크 밸브
버터 플라이 밸브
캐스트 스틸 게이트 글로브 체크 밸브
소형 단조 밸브
스테인레스 스틸 게이트 글로브 체크 밸브
다른 밸브
피팅 및 조작부
응용
증명서
연락
English
Espanol
Deutsch
Japan
Korea
제품
1/4 회전 볼 밸브
1000 WOG 양방향 볼 밸브
2000 WOG양방향 볼 밸브
고압 볼 밸브
API 6FA 화재 안전 볼 밸브
API 607 화재 안전 볼 밸브
비산 배출 볼 밸브
스프링 리턴 볼 밸브
ISO5211 직접 장착 볼 밸브
자동볼 밸브
플랜지 볼 밸브
V-제어 볼 밸브
트러니언 볼밸브
금속 장착 볼 밸브
위생 볼 밸브
다방향 볼밸브
극저온 볼 밸브
재킷 볼 밸브
특수 재료 볼 밸브
PFA 라이닝 볼 밸브
OEM 볼 밸브
이중 플레이트 체크 밸브
웨이퍼 타입 체크 밸브
러그 타입 체크 밸브
플랜지 체크 밸브
싱글 도어 체크 밸브
버터 플라이 밸브
동심 웨이퍼 타입
동심 러그 타입
동심 이중 플랜지 타입
고성능 이중 오프셋
고성능 트리플 오프셋
캐스트 스틸 게이트 글로브 체크 밸브
API600 게이트 밸브
API623/BS1873 글로브 밸브
API594/BS1868 스윙 체크 밸브
소형 단조 밸브
API 602, BS5352 게이트 밸브
API 602, BS 5352 글로브 밸브
API 602, BS5352 체크 밸브
단조 볼 밸브
스테인레스 스틸 게이트 글로브 체크 밸브
API603 스테인리스 게이트 밸브
B16.34 스테인레스 스틸 글로브 밸브
B16.34 스테인레스 스틸 스윙 체크 밸브
MSS-SP81 나이프 게이트 밸브
나사끼움 게이트 밸브
나사끼움글로브 밸브
상업용 체크 밸브
다른 밸브
Y 형 스트레이너
바구니 스트레이너
사이트 글라스
스트레이트 니들 밸브
앵글 니들 밸브
안전 릴리프 밸브
다이 버터 밸브
피팅 및 조작부
150LB 피팅
조작부 및부속품
손잡이 및 브래킷
스템 및 볼
‧
홈
>
제품
>
1/4 회전 볼 밸브
>
트러니언 볼밸브
TF-40
SIZE:
2" ~ 40"
2-pc design body full bore casting trunnion mounted ball valve. Blow-out-proof and anti-static stem design. Double block and bleed design. API 607 fire safe approved.
Drawing
Literature
P-T Chart
I.O.M.
Certificate
Product Features
• API 6D trunnion mounted ball valve.
• ISO 5211 mounted pad design for actuator
application.
• Double block and bleed design, single valve with
two seating surfaces that, in the closed position,
provides a seal against pressure from both ends
of the valve with a means of bleeding the cavity
between the seating surfaces. And single piston
effect seats design, as known as self-relieving
seats, permits the automatic release of nay over
pressure in the body cavity when the valve is in
the fully open or fully closed position.
• Emergency sealant injection which provide an
effective temporary solution for minor leakage
problems. Sealant can be injected directly to the
stem sealing area and seat sealing area to affect
a temporary emergency seal in the event of the
stem seal or seat seal is dmaaged. Valves would be
complete with emergency sealant injection over 6".
• API 607 6th edition fire safe approved.
In case of fire during the use of valve, the seat ring,
stem O-ring and middle flange O-ring made of PTFE,
rubber or other non-metal materials will be decompo-
sed or damaged under high temperature. Under
pressure of the media, the ball itself will push the seat
retainer rapidly towards the ball and make the metal
to metal sealing structure, which can effectively control
valve leakage.
• Other flange drilling standards (EN1092, AS2129,
BS10, etc.) are available upon request.
• Variety of material is available upon request, please
consult Terofox for specific application.
• Drain / Vent / Emergency injection / Supporting legs /
Lifting lug are available upon request.
• NACE MR0175 / MR0103 are available upon request.
Applicable Standards
Body Material
WCB / CF8 / CF8M
Seat Ring
PTFE / RTFE
Pressure Rating
Class 150 / 300 / 600 / 900
Valve Design
ASME B16.34 / API 6D
Connection
ASME B16.5 RF Flange end
ASME B16.5 RTJ Flange end
( Finished surface 125 ~ 250 AARH )
Face to Face
ASME B16.10 / API 6D
Valve Test
API 598
Model Option
TF-41: Reduce bore.
MS-40: Metal seat.
MS-41: Reduce bore, metal seat.
Operation Option
Bare shaft
Lever
Gear box
P
neumatic actuator
Electric actuator
비디오 센터
더보기 >
도구
더보기 >
돌림힘
밸브 온도 범위
부식 데이터
우리의 파트너가 되십시오
Like us on Facebook
Follow us on Twitter
Follow us on linkedin