• API 6D trunnion mounted ball valve.
• ISO 5211 mounted pad design for actuator
  application.
• Double block and bleed design, single valve with
  two seating surfaces that, in the closed position, 
  provides a seal against pressure from both ends
  of the valve with a means of bleeding the cavity
  between the seating surfaces. And single piston
  effect seats design, as known as self-relieving
  seats, permits the automatic release of nay over
  pressure in the body cavity when the valve is in
  the fully open or fully closed position.
• Emergency sealant injection which provide an
  effective temporary solution for minor leakage
  problems. Sealant can be injected directly to the
  stem sealing area and seat  sealing area to affect
  a temporary emergency seal in the event of the
  stem seal or seat seal is dmaaged. Valves would be 
  complete with emergency sealant injection over 6".
• API 607 6th edition fire safe approved. 
  In case of fire during the use of valve, the seat ring, 
  stem O-ring and middle flange O-ring made of PTFE,
  rubber or other non-metal materials will be decompo-
  sed or damaged under high temperature. Under
  pressure of the media, the ball itself will push the seat
  retainer rapidly towards the ball and make the metal
  to metal sealing structure, which can effectively control
  valve leakage.
• Other flange drilling standards (EN1092, AS2129,
  BS10, etc.) are available upon request.
• Variety of material is available upon request, please
  consult Terofox for specific application.
• Drain / Vent / Emergency injection / Supporting legs / 
  Lifting lug are available upon request.
• NACE MR0175 / MR0103 are available upon request.